Unitree G1 Spare Handel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare Unitree G1 Handel.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Here is a clean, scannable, and engaging description ready for you to copy and paste directly into Printables.
Unitree G1 Humanoid Robot – Reinforced Replacement Handle
Did your Unitree G1 take a bit of a tumble? This is a ruggedized, beefed-up replacement handle designed to keep up with the chaotic reality of humanoid robotics testing.
The original handle can be prone to breaking during a hard fall, so this model has been modified to be slightly larger and thicker than the stock version to distribute impact forces much better.
🚫 Material Warning: Skip the PLA
PLA: Not recommended. In testing, PLA proved too brittle. If your robot falls on a PLA handle, it will snap.
PETG-CF: Highly recommended (Currently Testing). The addition of carbon fiber gives it the perfect blend of rigidity and impact resistance needed to survive a drop. (Other high-impact filaments like PACF or Nylon should also work great).
🛠 Recommended Print Settings
To ensure this handle actually does its job, don't skimp on the walls and infill.
Orientation: Print flat on its side for the best layer line orientation (maximizes strength against downward impacts).
Wall Loops / Perimeters: 4 to 6 walls (more walls = more strength).
Infill: 30% - 50% (Gyroid or Grid for uniform strength).