1 / 8
Slim transport case for BetaFPV Pavo20 Pro O4 — zdjęcie 1
1 / 8

Slim transport case for BetaFPV Pavo20 Pro O4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A slim, pocket-friendly transport case for the BetaFPV Pavo20 Pro equipped with a DJI O4 Air Unit Pro.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
129
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

The case is a remix of Slim transport case (thing:6860371), which itself is a remix of the original case (thing:6607703)

What fits inside

Parts

The model consists of two printed parts:

  • Base

  • Lid

The two parts are connected with a simple hinge.

Hardware needed (hinge)

  • 2x M3 x 35 mm screw

  • 4x M3 nut

  • 4x M3 washer

Print settings

No supports needed.

  • Material: PLA

  • Layer height: 0.2 mm

  • Perimeters: 2

  • Infill: 15%

Assembly

  1. Print both parts (base and lid) without supports.

  2. Push the M3 x 35 mm screws through the hinge holes on both parts and secure with washers and nuts on the other side.

Tagi