Enclosure for ESP32-P4- 4.3inch touchscreen

Enclosure for the ESP32-P4_4.3 inch .

In the software Openscad, I combined the design with glass edge protection by @AKG5188 and the design with space for a battery by @Sandlabs_21 into a new design.

This is a variation on the design from 

Telegram KERN Group @SandLabs_21

https://web.telegram.org/a/#-1003824684676 

and

Github AKG5188/Kernsigner

https://github.com/akg5188/KernSigner/blob/master/hardware/cases/waveshare_esp32_p4_wifi6_touch_lcd_4_3_camera/screen_protective_case.stl

Print the stl file

• Use support in your slicer settings for the USB, buttons, and SD card slots.

• You can use the file "3D printer testfile with 15 cirkels .stl" to check in advance whether the printer is properly calibrated, with Z-offset and a flat print bed.

• You only need 4 screws M 2.5 x 8mm to put the things together.

• In this published design, only the power button can be operated directly; the reset and boot buttons can be operated with a ballpoint pen. 

Battery

I bought one on amazon,  innCraft Energy Lithium-polymeer batterij 600mAh 3,7V, 50x30x4 model 403048

with an  2P -  1,25 mm connector 

check the size, orientation of the connector before you connect it to the board, maybe you need to switch the black and red wire in the connector.

Openscad

https://github.com/openscad/openscad/

When you download the openscad software https://openscad.org/ you can use the openscad file:

Enclosure waveshare case 4.3 inch with batteryholder.scad

For faster rendering in openscad change  $fn = 70;  on row 14 temporary in $fn = 10;  and render with F6

AI, met Google in AI-mode

With Google in AI mode, you can easily retrieve Openscad code for a 3D design and modify this code during a call.

Start in google ai-mode the question with the word "openscad" and then ask what kind of design you want to create.

For example, if you ask the following question in Google AI mode:

"Openscad a cube with variable dimensions and variable location"

Then you will receive this openscad code as an answer,

Openscad code from google in AI-mode

// --- VARIABLES ---
// Dimensions of the cube (Width, Depth, Height)
cube_width = 20;
cube_depth = 15;
cube_height = 10;
// Location coordinates (X, Y, Z)
pos_x = 5;
pos_y = 10;
pos_z = 2;
// --- MODEL ---
// Translate moves the object to the specified location
translate([pos_x, pos_y, pos_z]) {
    // Cube creates the 3D block with the specified dimensions
    cube([cube_width, cube_depth, cube_height]);
} 

which you can subsequently paste into Openscad.

You do not need to fully understand the received Openscad code, although that naturally helps in finding the solution.

AI, met Google in AI-mode, get the pacman ghost code

With just a few questions to Google in AI mode, you can create the code for the Pac-Man Ghost. See the attached scad files.