Fairy Garden Pumpkin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More realistic housing for your Fairies, gnomes and tiny critters.
- Ocena
- 5 / 5
- Polubienia
- 137
- Pobrania
- 272
- Wydruki
- 1
- Wyświetlenia
- 1525
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My GF is keeping me buys designing and creating things for her Fairy Garden. This was one of my first creations, but I'm still happy with it. There's a few choices in file downloads.
Files prefaced with “sliced” are sections of the pumpkin sliced into sections. You'll need to do some glueing (CA glue works fine) - but you won't need any supports. The sections are the cap (needs infill, has a flat bottom), window (100% infill), door (actually the doorway - (100% infill)), and the main body. I printed with three walls and 30% infill.
There are two versions of the door. That's because you'll probably scale the model down. When you do, the door will be too thin unless you plan on glueing it in place. There's a thicker door that you can sink pins into as hinges. There's indicators on the body and door for pin centers.
There's a also a file that's the “Entire body - no cap or door” - it has the body, window and door frame as one piece. The cap and door are not there though. The sliced cap fits.
I've included photos of the prints and finished piece.
Another reason I printed with three walls was so I could sand and seams or noticable joins where the pieces were assembled.