DF54 grinder vibration dampening feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
improved feet for your df54, no gluing required
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I've designed improved feet for the DF54 grinder.
The idea was initially inspired by the V-shaped silicone feet from a broken cutting board that I placed under my DF54. Silicone has excellent vibration-dampening properties, and those feet significantly reduced the noise caused by grinder vibrations.
Typical silicone hardness ranges from 40A to 70A on the Shore scale, so TPU is noticeably harder. However, it still provides a clear improvement over the original feet. The model is designed for a precise fit, so no glue is required.
Recommended print settings
Material: As a general rule, the softer the TPU, the better. TPU 85A or TPU 90A works well.
Infill: Gyroid, 15–30% (feel free to experiment).
Print orientation:
Front feet: Print upside down with supports (PLA supports if you have a dual-nozzle printer such as the X2D, otherwise TPU supports).
Rear feet: Surprisingly, printing them on their edge gives the best results. (also include supports)
This is version 1, and I'm very open to suggestions and improvements. I'm currently working on a mold that will allow me to create an ultra-efficient version made from pure silicone.
Any feedback is greatly appreciated!