1 / 3
Husqvarna Viking 6000 Series Sewing Machine Cam Stack — zdjęcie 1
1 / 3

Husqvarna Viking 6000 Series Sewing Machine Cam Stack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My remix of the internal camstack for the Viking 6030, 6010 sewing machines

Ocena
0 / 5
Polubienia
3
Pobrania
52
Wydruki
0
Wyświetlenia
246
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This is based off the Viking camstack by KR34T1V over at Thingiverse. He already did all of the hard work on this model, so if you have an account go show some appreciation. I just converted the mesh to step, added a feature for better removable cam retention, and spent some time tweaking it to get the retention to my liking.

I have successfully used this on both a Viking 6030 and 6010. However, for the 6010 I had to use a lathe to machine off a lip that was present on the end of the metal piece. I guess if you are determined enough, you could probably do this with a file. There are some instructions out there which say to heat up the metal before pressing it on. Don't do that. Instead, just press it on with an arbor press or vise.

Note that if you make this replacement you will almost certainly need to re-time your zig-zag motion. See page 71 of the service manual for this procedure.

This part was printed with a 0.25 nozzle on a Prusa XL using Oveture Easy Nylon and with Polymaker silk PLA as a breakaway support. Layer height was 0.15mm. I used soluble support settings (0mm interface distance). Print as oriented in the file.

Tagi