DIY Solarlampe mit Prusament Spool Upcycling Leuchtturmform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solarlampe in Form eines schwarz weissen Leuchtturms aus einer Prusamentspule
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Originally it should have been wind powered, but i made a new construction with solar power. During daytime it's charging two NiMh batteries 1.2 V, when it gets dark it will automatically start to shine. With my two 1W LEDs it works all the night in summer. It's a little bit of soldering and i added the KiCad file as a zip if somebody wants to make a circuit board out of it. The solar panel is an 8 W 5V from Temu, which i had spare from another project, but a smaller will probably also do the job. The part list is seen in the scheme, probably any standard PNP and NPN transistors will do.