O ring seal for showerhead and hoses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
O ring seal. Dimensions: 19mm diameter, and 2.5mm thickness
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
PLEASE NOTEL: Print this out of TPU or other similarly flexible materials. I printed it out of 95a TPU and it works perfectly.
This is an O-ring seal for showerheads or anything else such as hoses etc. to prevent water from leaking out of unwanted places. I originally made this as I lost an O-ring for my showerhead (pictures) and while it did still work, water leaked down the hose. I measured the diameter that needed sealing and created this as a replacement.
To help you see if this is suitable, the Dimensions are 19mm diameter, and 25mm thickness. This is hopefully a fit for most showerheads, but if not, measure the diameter of the space you need this for and edit the scale in blender if you can.
This print is very small, and does not require supports so it should take no more than 2-3 minutes to complete.