1 / 5
DEYE Hybrid Inverter Fan Duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ductwork to allow a 120mm fan to extract heat from the top of the inverter and pump to an outside vent.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this to suit an 8kw Deye hybrid inverter I am mounting inside an insulated battery bunker. It attaches to the top of the inverter with 10mm wide double-sided tape.
It should suit 5/6/8/10/12kW models as they are the same size according to the datasheet (422W×658H×254D).
I control the fan using an ESP32, DHT22 and Esphome for monitoring.
