Highland Cow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Highland cow multipart
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This 3D model was created with the help of AI 🤖.
I separated the cow into parts (body, eyes, horns, mouth, hoof).
Well, this is the classic Highland Cow!
To be honest, I've never actually seen one of these cows in person. The only cows I'm familiar with are the classic black and white spotted ones. Hopefully I'll be able to share a model of one of those soon, since there aren't many available around here either.
Print tip: If you don't have brims enabled for small parts like the eyes/nose/horns, I recommend turning them on. These pieces can be a little tricky to print and the extra adhesion helps a lot.
Hope you like it!
General Print Settings
Nozzle: 0.4 mm
Layer Height: 0.16 mm (Bambu High Quality profile)
Wall Loops / Perimeters: 2
Detect Thin Walls: Enabled
Infill: 15% Gyroid
Material: PLA+
Support Settings
Support Type: Tree Support
Support Angle: 25°
Support Placement: On build plate only
Brim active
General Printing Information
Tested on a Bambu Lab P1S
Material: eSun PLA+ White (horns)
Material: eSun PLA+ Black (eyes, hoof,)
Material: eSun PLA+ Beige (mouth)
Material: eSun PLA+ Brown (body)