Knitted Otter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knitted Otter multipart
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This 3D model was created with the help of AI 🤖.
I separated the otter into parts (body, eyes, nose and belly).
A little Otter for someone special, or just for yourself!
I decided to give the outer fur (brown) a knitted texture while keeping the inner parts (beige) smooth for a nice contrast.
Otters are naturally adorable animals, and I already have a few more ideas in mind that I might upload in the future.
Print tip: If you don't have brims enabled for small parts like the eyes and nose, I recommend turning them on. These pieces can be a little tricky to print and the extra adhesion helps a lot.
Hope you like it, and happy printing!
General Print Settings
Nozzle: 0.4 mm
Layer Height: 0.16 mm (Bambu High Quality profile)
Wall Loops / Perimeters: 2
Detect Thin Walls: Enabled
Infill: 15% Gyroid
Material: PLA+
Support Settings
Support Type: Tree Support
Support Angle: 25°
Support Placement: On build plate only
Brim active
General Printing Information
Tested on a Bambu Lab P1S
Material: eSun PLA+ Beige (belly)
Material: eSun PLA+ Black (eyes, nose)
Material: eSun PLA+ Brown (body)