1 / 4
Precision Funnel — 50mm Top, 7mm Spout, Light on Filament | Resizable — zdjęcie 1
1 / 4

Precision Funnel — 50mm Top, 7mm Spout, Light on Filament | Resizable

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A clean, lightweight funnel designed for precision pouring rather than maximum flow rate.

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

A clean, lightweight funnel designed for precision pouring rather than maximum flow rate. The narrow spout and circular geometry naturally act as a partial seal, giving you more control over flow rate when needed.

Made originally as a PETG alternative to ABS funnels for use with acetone — but works for any liquid depending on your filament choice.

Dimensions:

  • Height: 75mm

  • Top outer diameter: 50mm (48mm inner)

  • Spout outer diameter: 7mm (5mm inner)

  • Wall thickness: 1mm

Print Settings:

  • Material: PETG recommended. Any filament works — match material to your use case

  • Walls: 2-3 — at 1mm wall thickness this effectively prints solid

  • Infill: Any — wall count covers it

  • Supports: No

  • Layer height: 0.2mm

Notes: Model can be resized in your slicer to fit different containers. If using for food or beverages, use a food-safe filament and avoid dyes or coatings not rated for food contact.

Tagi