Jaspers rack accesories, hook, pedal mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hook for cables or headphones, and a detachable pedal mount in 2 sizes
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
These are accessories to be used on a Jaspers rack.
The hook and pedal mounts are cut to fit the Jaspers 37,8mm tubes. A hook for cables or headphones, and a detachable pedal (or anthing else you want) mount in 2 sizes. You can fix them to the rack using 2 zip ties.
Pedal mounts are slightly tilted for better visibility. Use pedal board tape to fix your pedal to the mount. You can always slide it off the holder that is attached to the rack.
If you want to lock the accessories in place, use a small patch of double sided tape underneath the mount before fastening the zip ties.
These can be printed without support, I do recommend a 1cm brim for the pedal mounts. Also make sure the holder is placed flat on the printbed.
First fit may be tight, use a mallet to force the parts into one another and to detach again. Do this 2 or 3 times after which the parts will slide without effort. This ensures a perfect fit.