Dynamite Detonator Dice Tower With Interactive Plunger

Blasting Machine Dice Tower

Excite your tabletop group with this explosive, Old West-inspired dice tower. It features a faux-wooden exterior, and a working plunger that launches your dice into a dynamite tray. 

Features

Working Plunger

Press down to launch dice into the tray for an exciting, dynamic roll.

One Way Bearing

Print-in-place one way bearing gives you smooth coasting action after depressing the plunger. 

Customizable Plaques

Add custom text or graphics right in your slicer onto the included blank plaque.

Portable

Tongue-and-groove features let the tray interlock with the blasting machine box for easy storage and transportation.

Decorative Exterior

Mimics the look of 19th century railroad blasting machines with faux wooden box construction featuring screw heads, and dovetail joints

Print Instructions

• PLA 5 Colors (Max 3 per plate)

  • Blue Gray (Steel parts)

  • Brown (Wood parts)

  • Gold (Brass Parts)

  • Red (Dynamite)

  • Black (Dynamite strap, and contrast on plaque)

• 4 Plates

• 0.16 mm

• 0.4 mm nozzle

• Gyroid 15% infill

• ~22 Hours print time

Assembly Instructions

Note: Uses 8 n52 magnets of one size. Available in 5x1, 6x2, or 6x3.

1. Magnets: Glue all 8 magnets into their respective slots on the tray, box, and plaques. Double check the polarity before gluing. 

   1. 

2. Pin: Insert pin to the hole at the bottom of the box

   1. 

3. One Way Bearing: Drop one way bearing over the pin

   1. 

4. Spinner: Place the spinner over on the pin, on top of the one way bearing. Twist the spinner back and forth to work out any roughness in the action. You want it to coast smoothly.

   1. 

5. Shaft: Insert the shaft into the spinner, aligning the grooves and thread

   1. 

6. Lid: Put the lid over the shaft, with the arrow pointing to the front of the box. Align the side of the lid with the matching inset.

   1. 

7. Terminals: Slide the lid forward and down into place, then screw in the terminals to secure the lid.

   1. 

   

8. Handle: Screw the handle onto the shaft. It will stop aligned across the box as pictured.

   

   

9. Final: Magnetically attach your chosen plaque and tray to the box

   1. 

Optional Instructions for fuses

1. Cut two lengths of black filament

2. Position the filament so that the curves appear to converge above the tray

3. Glue the filament into the holes at the front of the tray

   1. 

      
       

Use Instructions

1. Drop dice into opening at the top

2. Lift plunger

3. Depress the plunger, with controlled steady force

TNT Plaque

The TNT Plaque is posted separately