1 / 1
Skadis mount for Sodola SL902-SWTGW124AS switch — zdjęcie 1

Skadis mount for Sodola SL902-SWTGW124AS switch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skadis mount for Sodola SL902-SWTGW124AS switch

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
1
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

Mount your Sodola SL902-SWTGW124AS switch to an Ikea Skadis board. You need two M3x8 countersunk screws to mount the parts to the bottom of the switch. You also need these T-nuts to screw the holder to the board.

Update 2026-06-15:
I've made another mounting bracket for this switch, which mounts the switch upside-down to the board so that the LEDs are easier to see when the switch is fully populated.

Tagi