1 / 1
Fishing Lure Collection #1 - Wire Bending Jigs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jigs for bending the wires for the cool lure collection by Steve Van Dokkumburg.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
Use these to help bend your wires for the Steve's cool lure collection!
Holes are slightly undersized and meant to be drilled out to 1/8in (or maybe just roll with a 3mm pin). I did a little reaming to allow for my 1/8in pins to slide in relatively easy, allowing me to put in pins as I bend the wire along the path.