Amerex fire extinguisher vacuum tool (oil sucker)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turns a Amerex brand fire extinguisher into a vacuum tool (oil sucker)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1
fire extinguisher vacuum tool (oil sucker) This turns a old junk fire extinguisher (Amerex brand) into a oil sucking tool. You use a 1/4 (or other size hose) from the fire extinguisher fitting into a tank you need to drain out and add air to the vacuum tool.
This makes a good brake bleeding tool, or a tool to prime a diesel fuel system like a pro(That's what I use it for).
The bottom side has a port and a 1/8 thread to add a 1/8 to barbed fitting, You need to add a hose that goes to the bottom of the tank to the barbed fitting, or it will spray out the oil threw the vacuum tool.
V2 tank mount is the same as v1 but taller and a better cut out for the brake vacuum tool (my brake vacuum tool)
I will include my vacuum tool v5 (3.6 only needs a inlet pressure regulator or use my chuck insert to lower the pressure goin into the tool, 5.3 needs a 1/8 to 1/4 barbed fitting from a hardwood store, or print one(I will be working on that part soon and adding it here), v5.3 and on are made to use two clamps(one on top and one on the bottom) but I have others on this site that don't need fittings.
Might want to look at using