Holder for stainless steel screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have created this holder for stainless steel screws, that fits to a standard bits holder.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This holder for stainless steel screws are created because stainless steel screws isn't magnetic and therefore it can be a two handed job.
The holder is created to fit a standard bit holder and when mounted, it is important, that there are space for this mechanism to be able move backwards, because the mechanism will move backward and when it does the “the claws” will open and release the screw.
Print it in vertical direction without support, but with brim.
Print it in horizontal direction and it will be stronger but remember support.
Layer high: 0.2mm QUALITY
Infill: 90% and lower
Time: 1h
Filament used: Pla Max
Or
Layer high: 0.3mm
Infill: 90%
Time: 32min
Filament used: Pla Max