Module Watch Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend wanted a simple watch stand for his six watches. I made this with the possibility of printing more parts to…
- Ocena
- 4 / 5
- Polubienia
- 48
- Pobrania
- 264
- Wydruki
- 2
- Wyświetlenia
- 1514
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A friend wanted a simple watch stand for his six watches. I made this with the possibility of printing more parts to add on to the existing one. The hole at the top of the stand looked ugly so I added the bung to fill it in.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.06mm
Infill:
10%
Notes:
I printed this in 0.06mm To have a smooth radius but I don't think it's necessary. Sorry for the orientation of the parts! The base and bung want to be rotated so the flat faces are down and the actual watch holders should be rotated almost upside down so the top flat surface of them are flat to the build plate.
Post-Printing
Tidy rough edges
Depending on the outcome of the print you may need to sand down the tubes of the stands so they fit in the hole of the previous. I managed to do this enough to get a tight fit without needing glue.
Category: Accessories