Baofeng UV16m Pro Volume Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement volume knob
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
My daughter took our dog for a walk and lost the knob to the walkie-talkie during the route. I tried to 3D scan another knob but it was just too small. In the end I made this using TinkerCAD which works very well.. it's a little tight to get on and isn't exactly the same but you'd never know from a distance. I have printed this in both PLA for testing and ASA as the final result.
In the images you can see the single black one is the original, the white and black are my creations, and the walkie talkies show two genuine knobs and the green one has my printed knob.
This model is completely free, however if you're feeling generous and this was useful to you, feel free to buy me a coffee https://paypal.me/terryd20. No pressure 😁
If you have printed this, please leave a comment and let me know.
Thank you.