Cat Inspection Passed – Two Color Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute two-color cat sign with paw prints, available with or without hanging holes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
A small two-color sign for every cat owner whose cat needs to inspect absolutely everything.
My cat always has to check every print, every box, every cable and basically every new thing that appears in the room. So this little “Cat Inspection Passed” sign felt necessary.
The model is designed for a simple manual filament change. Print the base in one color, pause before the raised details start, then switch to a second color for the text, border and paw prints.
You can use any color combination you like. I printed mine with a white base and black raised details, but black/white, orange/black, grey/white or colorful versions should also work well.
Two versions are included:
Version with two small holes for hanging it with a string
Version without holes for gluing, tape, magnets or just placing it somewhere
OpenSCAD source files are included as .txt files. You can simply rename the .txt files to .scad or copy the content directly into OpenSCAD. I used .txt so the files are easier to view and copy on different platforms.
Two-color printing note:
I recommend slicing this model with 0.20 mm layer height. The base prints first, and the raised text, border and paw prints start on top of it.
If you want to print it like I did with a manual filament change, check the slicer preview carefully and place the pause right before the first raised detail layer starts. This way the base is printed in the first color and the raised details are printed in the second color.
Depending on your slicer and printer, the exact pause layer may be different, so please verify it in the preview before printing.
Recommended print settings:
Layer height: 0.20 mm
Nozzle: 0.4 mm
Infill: 15 %
Walls: 3
Supports: No
Manual filament change / pause at height: before the raised details start
The model can also be scaled to your preferred size. If you scale it down a lot, keep in mind that the text may become harder to print cleanly with a 0.4 mm nozzle.
I’m happy about every Make. If you like it or want another version, feel free to ask and I may create more versions.