LayersFactory
Zgłoś model
1 / 1
modular batteling top — zdjęcie 1

modular batteling top

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

axo187

axo187

@axo187_4875859

it's a batteling top that is modular with a changable tip and replacable armor

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Toys & Games
Licencja
Open Community License v1
SzczegółyPliki (17)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (0)Powiązane

Am working on a 3d printer Design right now so this won't Change for know

this model is a batteling top that is modular with different tips and pieces of armor

If you want to scale ist up all parts need tobbe scaled to the Same size because Most parts have relatively Low clerances and this too is small so sone people might want to scale ist up 

This top doesn't come with a Launcher you need to use one of the ones which are compatible with the Spinning top from stl Denise of you scale it Up you need to also scale Up the individual launcher

i will put assembly instructions in german and english here (please excuse my spelling mistakes in german and in english) : 

english: 

  1. take the tip and put it into the two pieces of part a

  2. put it into part b so the tip comes out of the lore part 

  3. put the part into part c and twist it counterclockwise

  4. ad part d on top of it and twist it counterclockwise 

  5. slide over the armour

  6. ad part e on top of it and twist it counterclock wise 

german: 

  1. dieser zusammenbau ist nur ein kleiner abendspaziergang also als erstes nimmst du die spitze und beide part a und füge sie so zusammen das sie halten

  2. danach legst du  diesen part in part b so, dass die spitze an der unterseite hinaussteht 

  3. lege part c auf das aktuelle bauteil und drehe es gegen den Uhrzeigersinn

  4. wiederhole den schritt für part d

  5. führe die rüstung über das aktuelle bauteil

  6. nimm part e und wiederhole dass selbe wie bei part c und d

thanks for downloading

 for original size i recommend a 0.1mm nozzle or smaller to get the Tip right for the "normal" 0.4mm nozzle i recommend Double size 

if you print doubel size don't forget to scale up the launcher and ripcord

bye for now

Oh and if you want to Print the bfa 2.0 you will need a printer with 450mm buildvolume on x and y or to be exact 420-430 this ist for the Doubled size

Change log 

1.1 Removed all presliced models

1.2 changed part a and b to fix a problem

1.3 AS soon AS i have done IT the step will be only one and updated i Work with Fusion now

1.4 forgot to Upgrade the step and i tested the new cartiridge and already found a new mistakes i will fix it soon

Tagi

kreisel