1 / 2
Light Switch Protector — zdjęcie 1
1 / 2

Light Switch Protector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protect a light switch that's supposed to stay on all the time, but have an emergency way to turn it off.

Ocena
0 / 5
Polubienia
64
Pobrania
91
Wydruki
0
Wyświetlenia
744
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction

The guard ensures the switch stays in the right position, so it's great if you have motion lights outdoor lights or switched outlets you want to ensure stay on.  The slot on the side and the wand still gives you a way to operate the switch if needed, and the guard stores the wand.

See it in action:

Printing

I printed it in PETG, but it should work fine with PLA too.  The model is designed to print without supports, though there are some long bridges on the side slots.  The 3mf file is a PrusaSlicer project, and the STEP file is provided as well.

Installation

This guard lines up with standard US switch plate screws. It attaches to the existing switch plate with the existing cover screws.  Simply remove the cover screws, add the guard, and replace the screws. Because It goes outside the existing switch plate, there's no concern about fire safety.

Tagi