1 / 3
WipEout 3 Race Starter - Prusa i3 MK3 Z-Axis Top Decoration — zdjęcie 1
1 / 3

WipEout 3 Race Starter - Prusa i3 MK3 Z-Axis Top Decoration

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D figure of the iconic Race Starter from WipEout 3 (PSX) designed for the Prusa i3 MK3 Z-axis frame.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bring some 90s PSX nostalgia to your Prusa printer! 🏎💨

This is a custom 3D model of the iconic Race Starter character from the legendary PlayStation game WipEout 3, originally designed by The Designers Republic.

I remodeled this classic figure from scratch and equipped it with a custom hexagonal peg on the bottom. It fits perfectly into the hexagonal opening on the top Z-axis motor mounts of the Prusa i3 MK3 / MK3S+. No glue, no screws — just plug it in and let it guard your prints.

⚙ Print Settings & Tips:

  • Supports: No supports needed.

  • Infill / Perimeters: Works flawlessly even with lightweight or speed-optimized profiles (tested on my own tuned "WEAK" profile).

  • Filament: PLA, PETG or whatever you currently have loaded on your printer! 🖨

Show me your makes if you install this retro racer on your rig! 🎮🕹

Tagi