Sturdy filament spool holder / storage rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two version, one for 1" wood stock and one for 28mm wood stock. The multi part design makes it quite strong.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Needed a "simple" filament storage system that could hold some serious weight. This design is pretty adjustable so just find some studs in your wall and mount the wall bracket.
Made for both 28mm wood stock and 1" wood stock and 4mm or similar screws for the wall mount.
For the insert, pause the print and insert the part (print in fancy colors for extra fun). The insert should be printed with 5 perimeters and no top/bottom layers.
The small locking clip prevents the french cleats from moving up over time for extra strength - do not forget to put these in!
