Flashforge Adventurer 5M Enclosure - Fallout Edit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a vault tec version of the official flash forge AD5M enclosure kit (enclosure kit required)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
this isn't my model. this is a reupload/conversion of another model that was only supported to print on bambu studio. so ive converted the files to stl's so its supported by every slicer and can be printed on most printers with a large enough build volume
*** Also, If you get the Flashforge DIY enclosure kit YOU WILL NEED AN EXTRA M4x12 SCREW TO MOUNT THE SPOOL**** as the spool used is not the one designed with the Flashforge kit.
you need the enclosure kit wich can be bought on the official site or by 3rd party sites
official enclosure kit: https://eu.flashforge.com/en-eu/products/ad5m-kit?srsltid=AfmBOor9Rnsp8aG6TzXIz50p6PxgWs5PhViyxZtz6Q41dfoLx001Vo15