Armrest Tray for Thomasville Gilroy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Armrest tray with convenient storage on top. Wood pattern added for aesthetics and texture. Optimized for Snapmaker U1.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is fitted to the Thomasville Gilroy sofa/couch/lounger but will work with any armrest with an approximate width of 180mm (7"). Optimized to print on the Snapmaker U1.
If printing from the .stl, choose your preferred orientation and make a 0.4mm cut for a clean first layer. The .3mf file already has a cut. If you have a preference in the wood texture, use the .stl and modify as you see fit, otherwise use the .3mf.
BumpMesh.com was used to apply wood texture. Support Stefan at cnckitchenus.store for this amazing tool.
Suggestions
5mm auto brim for security
3 wall loops for structural support
10% infill is adequate
Adaptive Cubic infill pattern
Print in "C" orientation, especially on bed-slingers
Notes:
PLA is fine for room temperature uses
No supports needed