Nellafrin 2026 antelope fursuit head base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My personal fursuit head base for Nellafrin 2026
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a work in progress slim fit fursuit head base that is meant to attach to a klien tools four point hardhat suspension. My build includes an internal fan, and teeth in the lower jaw.
This is my own personal fursona, and I would like to maintain a level of uniqueness, so I ask that if you do download and use these files, that you look into modification to a degree, to develop this lope into your own unique design as well.
This lope is intended to be printed out of PETG or a similar material, as the face needs to be as strong yet light as possible.
The ears are meant to be printed in 95A TPU with zero walls, 20% gyroid infill, and a modifier to make the bottom 2cm solid rubber to accept #14 screws for attachment to the face component.
The horns need to be as llight as possible, and are meant to take inch and a quarter neodymium magnets.
The jaw gets attached with nylon #4 machine screws, and is tensioned with an elastic band.
Feel free to reach out to me on tellegram at @SpaceLope or discord under _dexagon_ if you have any questions.
Have fun, play safe, be kind to one another.