Barrett MRAD Bolt Head Buddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handy cap to keep track of a Barrett MRAD bolt head and keep the barrel from rolling around when not in use.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The Bolt Head Buddy (BHB) is a gear organizing print used to keep track of Barrett MRAD bolt heads and to keep the barrel from rolling around when not in use. The BHB is also designed to fit in the factory case cutout for an extra barrel so this is a basic kit upgrade with no changes needed.
As I store the bolt head in the spare barrel when not in use, I designed the BHB to clearly show if the bolt head was stored properly or not. A quick look at the BHB shows if the bolt head is secured. No rummaging in the case to see where I put it.
When printed in TPU the BHB is durable and protective of the barrel and the bolt head. The BHB can be printed in a hard plastic like PETG but the alignment tab on the interior may be quite snug and make removal difficult until it is broken in.
Print in TPU. No supports needed.