1 / 1
Garmin Xero C1 Pro cover and mounting arm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garmin Xero C1 Pro cover and mounting arm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Cover and mounting arm for Garmin Xero C1 pro, if only the cover is used, no other hardware is needed. Mounting arm is used for attachment directly to a weapon with a M-lok system. With it being used you need M-lok nuts, screws for them and a 1/4-20 x 20mm screw for the radar itself. The arm has two version, one fully printed the other with slots for reinforcements. As reinforcements steel rods can be used of 6mm diameter or M6 thread rods with a lenght of 90mm. For the longer upper opening i reccomend to use supports.
Changelog: