Calipers EDC (mm, in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a redesign of my popular EDC Calipers. I finally got around to making a more asthetic fuctional model for inches
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This redesign is based on my previous design published in Makerworld. As part of diversification I will make this model available on Printables only.
The main improvement is the uniform design asthetics, improved strength, and inclusion of interchangable slide from metric to imperial systems of measure.
The metric is split into milimeters with every 5 mm pronounced and every 10 mm further pronounced.
The imperial is split into 1/16 inch increments with every 1/8" pronounced and every 1/4" further pronounched. The 1" mark is also marked. (In the images i know that one of the 1/4" is longer I fixed it in the model)
If you like this model please leave a like and comment to boost the algorithm. Thanks, :)