Monolithic three degree nerf rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picatinny riser rail, tilted down by 3 degrees to account for drop over range.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I love the canted rail risers but I was having a hard time getting other designs to clamp truly parallel with the pic rail on my blasters, so I decided to design this monolithic version, which should help with level alignment. This starts to matter, when mounting optics that have a fixed crosshair, that can not be adjusted for roll.
This works quite well with 6x32 by inch and a quarter machine screws with lock nuts, but I believe the connection may work with M5 hardware as well.
This kind of rail will only work with a blaster that allows accessories to slide on from the end of the rail. it will not click on overtop unless you print it out of TPU or something wild.