Mod Kit for "TF2 Pistol" by methanejuice. (Nightingale mag fed Nerf string blaster)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
~65fps Stringer pistol.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mod kit for the TF2 pistol by methanejuice.
Please rate, like, and download so I can get free filament and keep making models.
Adds:
Picatinny rail on the blaster prime, a larger tip, sight, and a larger mag.
Aravage Range: 196.55in (after 10 shots)
Hardware needed:
#4 x 0.375'' Thread-Forming Flat Head Screw, QTY 9
Two sections of 4mm elastic string
Talon Magazine spring or a PETG printed nerf mag spring.
One 1.02362'' Screw
Filaments needed:
PLA and PETG
Assembly instructions :
Blaster:
How to Video zip in files.
1.Insert mag holder into Body Left as shone.

2.Add spacer

3. Thread string through trigger and add a nought at either end.

4. Add trigger

5. Secure the string

6.Add Body Right

7.Add 7 #4 Screws as shone.

8.Add and glue the Joints and flourishes to corresponding sides.
(mine were printed on the body to save PLA)

9.add the Safety tip

10.Add the dart pusher to the prime with two #4 Screws


11. Add prime to Blaster

12.Add string to blaster and tie a nought.

13. Add Sight and 1.02362'' screw to secure it to the blaster.

Mag:
I included a printed spring, but it was not strong enough when printed in petg, but silk PLA worked better. Unfortunately the mag had too much friction and I only had two small PLA springs so I don't know if it it will work. Talon mag springs can be found at Out of Darts:http://outofdarts.com/products/worker-talon-magazine-spring-5-pack?srsltid=AfmBOoqAtAq6W8CenFKhWqxpmRE1JPla3Qj5IdCjGsQAoyquW5oDLcbB
Mags also can be found at OOD:https://outofdarts.com/products/worker-nightingale-15rd-slim-angled-mag and I would suggest that you use those over the printed mag.
How to use
Step 1.

Step 2. Pull back prime until it stops and string is in the gruve.

Step 3. Slide prim back to the original position.

Step 4. Pull trigger all the way back and than release to fire one dart.
