Nokta PulseDive Stand-Up Adapter Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Search for treasure on dry land!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Important: Split the adapter along the Y axis and place each half face-down for printing (see photo). None of the interior cavities should need supports but a few well-spaced tree supports do help.
Made this kit of parts so I could use my Nokta PulseDive on dry land or along the shore at the beach. Vibrations from the PulseDive travel up the pole.
You'll need twelve M3 screws/bolts and matching nuts. And a pole. The one I used is from an old Bona mop; diameter is 25mm.
The handle has a handy storage compartment inside. I suggest adding some pull-chain to the cover to make it easier to remove. Add something brightly colored to the chain in case you drop it.
I printed the adapter in Polymaker CoPA. Not sure how that will hold up, we'll see. Printed the rest in Polymaker HT-PLA. The cap for the storage was printed in TPU.