1 / 6
Adapter for Grohe Tempesta Bidet Holder - to glue it to the tiles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you dont want to drill a hole into the tiles, just use double sided glue tape and stick it to the tile.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you dont want to drill a hole into the tiles, just use double sided glue tape and stick it to the tile.
The Grohe Tempesta Bidet Holder itself is not suitable for gluing.
If it works with other Grohe Holders - DILLIGAF. ;-)
I wanted to use 50mm double sided tape.
Use 20mm M5 Screws. Ofc I cut the thread myself after printing.
Printed in ASA. ABS will do, PETG might work, PLA I would not use