Nalgene Shoulder Strap Harness
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A harness that fits around the neck of a standard 1L Nalgene to mount D-rings that a shoulder strap can be attached to
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This model is a harness for a standard 1L Nalgene water bottle that allows two D-rings to be connected to it. The idea is that this allows for a shoulder strap to be attached to the water bottle, letting you carry it around without having to use a whole hand to do it.
Note that this is probably not compatible with the standard Nalgene lid strap. I'm using an aftermarket cap, specifically the capcap+ from humangear.
I printed this using the 0.15mm structural default on a MK4S. I used PETG for durability, though it's possible PLA would work. I recommend orienting it with the flat side down. That's how it's designed to be printed, but solidworks uses different axes than slicers do.
I found when I printed this that some of the edges were sharp, despite the design having chamfers. Some filing or sanding might help that.
This model requires hardware: 1x M2 square nut, 1x M2 socket cap screw in 10mm-12mm length, and two D-rings. I bought the D-rings off amazon (https://www.amazon.com/dp/B0C225XHHR) but I think other 25mm nylon webbing D-rings might work. See the pictures for D-ring dimensions. You could probably also 3d-print your own.
I have included STEP, STL, and SolidWorks files for this.