Bestmow T-100 Robot Mower 5-Blade Disc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement mower disc for Bestmow T-100 as a 5 blade disc.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Replacement disk for the Bestmow T-100 as a 5 blade. Bestmow doesn't sell replacement discs, much less one modified for 5 blade. I chose 5 blades because that's what I like.
Included is the f3d file for anyone to remix off of to make it an original 3 blade, 6 blade, or however blade you choose. There are parameters anyone can edit inside.
I recommend printing this in PETG-CF, since I made the plate thin. You can modify it to make the plate thicker to use more common filaments.
You can get away with not using supports. I didn't, since my printer can decently handle overhangs. If you care about what the plate looks like, add supports on the middle.
Uses 5 M4 bolts (ignore it saying it uses M3 in the f3d). I intentionally made it so that you have to press fit it REALLY hard with a pair of pliers. IMPORTANT: Add a washer/nut behind every blade so it's not flush with the bottom of the blade. If it's flush, it will not cut!
In the image I incorrectly made the 3 holes not fit the included tool to clamp the plate when replacing the blades. The file should be updated to fit the tools, but I have not printed that out.