1 / 7
Anycubic Kobra X headcover fan 3010 and led upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We will connect two LEDs in series and then connect them in parallel with a 3010 fan
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 869
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
Anycubic Kobra X headcover fan 3010 and led upgrade
Supplies included:
- 1 fan 3010 24v 1A
- 1 jack 2 pin 1.25mm (male)
- 2 jack 2 pin 1.25mm (female)
- 2 led 5mm 5v
- 1 resistor 1k ohm
- 4 hex socket bolts M3 15mm
- 4 M3 nuts
We will connect two LEDs in series and then connect them in parallel with a 3010 fan
