Chainsaw Drip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chainsaw tray to catch oil drips, and help with transporting.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 289
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a from-scratch design of similar transport/drip trays that can be bought online, for my Husqvarna chainsaw. The part is larger than almost all printers so will need to be cut and printed in two parts. I used the round connectors in PrusaSlicer with some super glue to hold the parts together, along with a strip of duct tap on the back side to seal the slight remaining gap. I made it out of ABS because I have lots of it on hand, but PETG or even TPU would probably be a better choice. The strap can be any elastic you have on hand - I happened to have a few large rubber bands around.