1 / 1
Skadis mount for Sodola SL902-SWTGW124AS switch (upside down) — zdjęcie 1

Skadis mount for Sodola SL902-SWTGW124AS switch (upside down)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skadis mount for Sodola SL902-SWTGW124AS switch (upside down)

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
1
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This is yet another mount for a Sodola SL902-SWTGW124AS switch to bolt it onto an Ikea Skadis board. Compared to my other one, this one mounts the switch upside down onto the board which makes seeing the LEDs much easier when the switch is fully populated with cables. It takes more filament and more time to print, though.

You need two M3x8 countersunk screws to mount the parts to the bottom of the switch. You also need these T-nuts to screw the holder to the board.

Tagi