French Cleat Extendable Side Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic is cheap, wood is expensive. This lock keeps your tool holder on the wall, even when your holder falls short.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you are like me and have tried to optimise your wood usage when building tool holders, then you might find that the common French cleat locks do not work for you. I have designed this lock so that it can be extended past a tool holder to reach where your holder doesn't.
For now this is a single size that fits my 50mm tall, by 12mm thick French cleats. The lock will allow you to extend past this depending on screw placement. If you need different dimensions, feel free to drop a comment and I will see what I can do.
3 wall loops with 15% infill seems to work fine for me. Supports are needed for the bracket.
I recommend greasing the bracket or pushing the bar through a few times first as it is a deliberately tight fit, to prevent racking.
For wider holders, I recommend one on each side.