Giant Clothespin Hair Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Giant clothespin hair clip. Cute, funny, and slightly oversized...more beautiful than functional!
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1012
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution
Introduction
Ever wanted to wear a giant clothespin in your hair? Now you can!
This oversized clothespin hair clip is a fun and eye-catching accessory. It assembles with just a few rubber bands and requires no additional hardware.
While it works as a hair clip, its large size and weight make it more of a humorous fashion statement than an everyday practical accessory. Whether you're looking for a quirky costume piece, a conversation starter, or simply a fun print, this giant clothespin is sure to stand out.
Print in Place
No support required
Rubber bands required for assembly
________________________________________________________________________________________________________________________________
Wearing the Hair Clip
Due to its large size and weight, this hair clip is not as easy to wear as a regular hair accessory. The rubber-band spring mechanism also provides less leverage and clamping force than a conventional hair clip. However, preserving the authentic look of a classic clothespin was the main design goal, so these compromises were made intentionally.
My advice:
The clip holds much better when worn directly over a hair tie. The hair tie provides additional grip and helps keep the clip securely in place.
________________________________________________________________________________________________________________________________
Printing & Assembly
This model is designed as a print-in-place part, so no assembly hardware is required and it is already oriented correctly on the build plate.
Due to the size of the model, I printed it using a 0.6 mm nozzle with a 0.3 mm layer height, which significantly reduces print time. A 0.4 mm nozzle will work as well, but expect a longer printing time.
For the final assembly, you will need a few standard rubber bands or hair ties. Simply stretch them around the outside of the clip and position them in the dedicated grooves on both sides.
________________________________________________________________________________________________________________________________
Update Log
17.06.2026 - Upload V1