PTFE Tube and Polar Cooler Tube Clip for Qidi Q2 and Similar Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an exact replica of the original cable guide clip used on the Qidi Q2, remodeled from scratch.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is an exact replica of the original cable guide clip used on the Qidi Q2, that I modeled from scratch.
In case you ever need additional ones for any reason.
The model is a precise copy of the original clip, including the holes for both the PTFE tube and the Polar Cooler tube.
Print Recommendations:
For the best dimensional accuracy, print with the wall order set to Outer/Inner (outside-to-inside).
Recommended material: PETG.
Use 3–4 perimeters/walls.
A 0.1 mm layer height (or less) is recommended for the best results.
enjoy)