1 / 5
Door Stop Hold Catch Clamp Clip Wardrobe Türhalter Türclip Tür Schrank — zdjęcie 1
1 / 5

Door Stop Hold Catch Clamp Clip Wardrobe Türhalter Türclip Tür Schrank

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hält Schranktüren zu

Ocena
0 / 5
Polubienia
186
Pobrania
325
Wydruki
0
Wyświetlenia
1420
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Das Original in Thingiverse ist super und funktioniert klasse. Habe die Befestigung des Klammer-Teils gedreht und das gesamte Modell so vergrößert, dass es die Tür eines 2,20 m hohen Aktenschranks geschmeidig schließt und niemand auf die Idee kommt, die Tür am Widerstand angelehnt zu lassen, weil man ja so fest drücken muss, bis der Halter "Klick" macht. Auf den Fotos ist der schmaler gehaltene Zapfen zu sehen, der wenig Widerstand beim Öffnen und Schließen bietet, aber die Tür trotzdem zuverlässig zu hält. Der originale, passend vergrößerte Zapfen ist aber auch zum Download bereit. Die Löcher sind für Schrauben mit 4,5 mm Senkkopf, ich habe 4,5 x 16 verwendet, es genügen je zwei Schrauben.

ENGLISCH

The original in Thingiverse is great and works perfectly. I rotated the mounting of the clamp part and enlarged the entire model so that it smoothly closes the door of a 2.20 m high filing cabinet, and no one would be tempted to leave the door ajar because you have to press so hard until the holder "clicks." The photos show the narrower pin, which offers less resistance when opening and closing but still holds the door securely. The original, appropriately enlarged pin is also available for download. The holes are for 4.5 mm countersunk screws; I used 4.5 x 16 screws, and two screws are sufficient.

Tagi