Print-In Place Folding Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A folding table that can be printed as a single print with no assembly needed.
- Ocena
- 4 / 5
- Polubienia
- 227
- Pobrania
- 1054
- Wydruki
- 5
- Wyświetlenia
- 5671
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a print-in-place folding table for all your folding table needs. Perfect as a plant stand, doll table, food display, or anything else you might want a small folding table for. When not in use, the table legs can fold away for easy storage.
Features
- Easy to add images to the top of the table for any event or holiday.
- Legs lock in the closed position with clips.
- Three table tops available: Solid, mesh, and Christmas tree.
- Optionally, you can add 8 6mm x 6mm magnets to lock the legs in the upright position.
- The magnets are press-fit and can be removed using a small Allen wrench to pry the magnets out.
| Table | Table Top | Table Heigh |
|---|---|---|
| Tall Table | 200mm x 200mm | 146mm |
| Short Table | 200mm x 200mm | 90mm |
Additional Parts (Optional)
| Quantity | Part | Notes |
| 8 | 6mm x 6mm round magnets | Optional |
Printing
I would suggest printing in PLA+ for the added strength but it should work with regular PLA. Don't print in PETG, the tolerances are too tight and PETG is too strong for the print-in-place hinge to function.
These values need to be set so that the print-in-place hinge is strong enough:
- Vertical Shell Perimeters = 5
- Horizontal Shells Solid Layer Top = 6
- Horizontal Shells Solid Layer Bottom = 5
Setting a filament change at 3.2mm allows you to have a different color table top than the legs.
Assembly
- Apply a sideways force to the end of each leg to break the leg free.
- Rotate the leg to a vertical position.
- OPTIONAL
- Insert the 6mm x 6mm round magnets into the slots in the hinge.
- Ensure that the magnets attract each other
- Magnets are press fit and can be removed if desired by using an Allen wrench