1 / 1
Shark Navigator Lift-Away Pro (NV365E) Brush Bearing Support — zdjęcie 1

Shark Navigator Lift-Away Pro (NV365E) Brush Bearing Support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bearing Support Bracket for either side of the brush on a Shark NV365E vacuum cleaner (may work for other models).

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The bearing for the brush in our Shark NV365E vacuum cleaner started making a terrible noise due to the brush being fully clogged with hair (the tragedy of living with many daughters!).  After taking things apart, the problem became clear - the bearing had seized up and then torn apart the plastic bracket it is meant to sit inside of.  This model was designed by copying the dimensions of the good bracket on the other side of the brush.  Printed in PLA+, cleaned everything and re-lubed the bearing, put it back together with the printed part in place for the torn-up bracket and everything is back to happy-happy (until the hair gets to the bearing again!).

Tagi