1 / 2
Hayward SPX0710Z16 Handle Bearing / Thrust Washer (Multiport / Vari-Flo Valve) — zdjęcie 1
1 / 2

Hayward SPX0710Z16 Handle Bearing / Thrust Washer (Multiport / Vari-Flo Valve)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for the Hayward SPX0710Z16 non-metallic bearing, the flat annular thrust washer that sits under the handle

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Replacement for the Hayward SPX0710Z16 non-metallic bearing — the flat annular thrust washer that sits under the handle on Hayward Multiport and Vari-Flo sand/DE filter valves. It keeps the handle from grinding directly against the valve top.

Dimensions (matching the OEM part):

  • Outside diameter: 2-1/16" (52.4 mm)

  • Inside diameter / bore: 1-1/8" (28.6 mm)

  • Thickness: 1/16" (1.6 mm)

A note on material — please read before printing. The original Hayward part is molded in nylon (some equivalents use PTFE), which Hayward chose specifically because it's low-friction and self-lubricating. This model is intended as a temporary / stopgap fix in PETG. PETG holds up fine to chlorinated pool water and the loads here are light, but it's grippier and wears faster than nylon, so expect the handle to turn a little stiffer and the part to last weeks-to-months rather than years. If you want something closer to OEM longevity, print it in nylon. Treat this as a "get the valve working until the real part arrives" solution.

Tagi