Mazda 3 Sport (Hatchback) Cargo Sidewall Tie-Down Mount (4th Gen - BP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mazda 3 Sport (Hatchback) cargo area sidewall tie-down mount adapter for Audi A4 tie-downs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom designed adapter to install an Audi A4 (B6/B7) cargo tie-down securely to the original sidewall cargo net tie-down mounting points in a Mazda 3 Sport (4th Gen BP Hatchback).
Printed with Black PETG filament, using 50% infill for strength, however less infill will be sufficient.
Mounts to the original threaded mount points using a single 22mm bolt. You will need to drill a hole through the original Audi tie-down using the center hole in the printed adapter as your template.
The Audi tie-down can be secured to the printed adapter using two 10mm bolts. This is strictly for aesthetic reasons, as the center bolt will also secure both to the car.
I am using the original Audi 4-point Cargo Net as well, however any cargo net or bungee cords will work.
Parts required (per mounting point)
1 x Audi Cargo Tie-Down, part # 8E0-864-203 (or VW # 1J0-864-203), easily found on eBay
1 x 22mm x M6 x 1.0 (course thread) bolt
2 x 10mm x M6 x 1.0 (course thread) bolts
Note: Future plans are to create a second adapter to mount two more tie-downs on the rear edge of the hatch, using original Mazda mounting points with similar tie-downs.