1 / 3
KTM 990RCR luggage plate for Kreiga US tailpacks — zdjęcie 1
1 / 3

KTM 990RCR luggage plate for Kreiga US tailpacks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model replaces the pillion seat on a KTM 990 RCR with a plate that can be used to attach Kreiga luggage tags.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The KTM 990 RCR stock seat arrangement seals the subframe out of use as attachment points for normal Kreiga US tailpack tie downs. This model replaces the stock seat with a small plate which includes slots to accept Kreiga US pack tie downs. 

I printed the plate on a Qidi Plus 4 using Qidi ABS-Rapido with 40 % gyroid infil and Hibbert curve for the bottom surface, which was printed on a diamond texture plate. It feels pretty solid. Print using supports for the pin notch and overhang. 

The model needs some small rectangular squishy pads on the 4 towers to make a solid feel on the bike and some experimenting with pad thickness. I have no idea how strong the locking pin will be in use but it feels OK. Use the seat release key when installing the plate on to the bike. 

All use of the model is at the printers own risk. 

UPDATE 24/08/26

The night before a big trip I used this for the first time and the model broke as I was tightening the luggage to the plate. It broke at the securing pin and tongue which locates at the front of the model. More time is needed to get this model to where it needs to be to hold a decent load. In the meantime I actually found that the Kriega straps could fit through the gap between the pillion seat and the pillion mount.