Lid for Bodum Tea/Coffee-Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had this Bodum Tea-Pot, but the lid was gone. Printed in ABS, works well. Also works as Phone stand.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
The lid for my Bodum TeaPot had vanished into the abyss. I think it never actually had it.
Anyways, to keep my tea hot for longer I designed this lid for the pot. Printed from ABS so it can withstand the temperatures, works well until now. For the part around the handle knobby thing I used a bit of support.
It is quite the friction fit but I think it will deform a bit over time to be a bit less tight. There is also a spot for pouring so you don´t have to take the lid of. You can rotate the lid a bit to seal the pot up a bit better.
I also printed it in a colour that is easily visible to hopefully not have this one also vanish into the abyss somewhen in the future.
Edit: It also works as a phone stand once you are done drinking your Tea/coffee. I had to use an old phone for showcasing it as I needed another phone to take the picture…